250v 200v 6v 3a 5a 1w 1w ?65 to +200c 200c 15c/w 175c/w buy49s document number 3089 issue 1 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. v cbo collector ? base voltage (i e = 0) v ceo collector ? emitter voltage(i b = 0) v ebo emitter ? base voltage (i c = 0) i c collector current i cm peak collector current p tot total power dissipation @t amb 25c @t case 50c t stg storage temperature range t j maximum operating junction temperature rthj-case thermal resistance junction-case rthj-amb thermal resistance junction-case-ambient mechanical data dimensions in mm (inches) silicon npn transistor absolute maximum ratings (t case = 25c unless otherwise stated) applications ? switching speed low collector emitter saturation general purpose switching 0.89 (0.035) max. 12.70 (0.500) min. 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 6.10 (0.240) 6.60 (0.260) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 1 2 3 0.74 (0.029) 1.14 (0.045) pin 1 ? emitter pin 2 ? base pin 3 ? collector underside view to?39 package (to-205ad)
parameter test conditions min. typ. max. unit v cb = 200v i e = 0 t c = 150 c i c = 100 ai e = 0 i c = 20ma i b = 0 i e = 1ma i c = 0 i c = 0.5a i b = 50ma i c = 0.5a i b = 50ma i c = 20ma v ce = 5v i c = 0.5a v ce = 5v i c = 20ma v ce = 2v t c = ? 55 c i c = 100ma v ce = 10v i e = 0 v cb = 10v f = 1mhz i c = 0.5a v cc = 20v i b1 = ? i b2 = 50ma v ce = 50v 0.1 50 250 200 6 0.2 1.1 40 40 80 16 50 30 0.3 1 0.2 buy49s document number 3089 issue 1 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. i cbo collector cut-off current v (br)cbo collector ? base breakdown voltage v ceo(sus)* collector ? emitter sustaining voltage v ebo* emitter ? base sustaining voltage v ce(sat)* collector ? emitter saturation voltage v be(sat)* base ? emitter saturation voltage h fe* dc current gain f t transition frequency c cbo collector ? base capacitance t on turn-on time t off turn-off time i s/b** second breakdown collector current a v ? mhz pf s a electrical characteristics (t case = 25 c unless otherwise stated) notes * pulse test: t p = 300 s, = 1.5% ** pulse test: 1sec, non-repetitive pulse.
|
